News

21.11.2017

Double the service life when grinding with the spindle cap 3.0

A new spindle cap doubles the service life of the grinders for carving/thrilling/parallel grinding through improved irrigation and thus reduces tool costs by 50%. Features: _ 3 nozzles for 360° irrigation of the grinders _ Doubling the service life of the grinders and thus halving of grinding costs _ Easy assembly in few steps _ Compatible for all Motion 2 types   The spindle cap 3... > Read more
21.11.2017

Win the Artex CR as a special limited edition

On the occasion of the 100.000 Artex Carbon articulator sold, there’s a highly limited, black edition of the Artex CR out now. And you can win one of two devices RIGHT NOW! On the occasion of the 100,000th sold Artex Carbon articulator, Amann Girrbach will introduce an extremely limited special edition of its Artex CR bestseller for analogue functional design. The subtle, yet striking, blac... > Read more
21.11.2017

Ceramill Zolid HT+ Preshades – stable, economical, aesthetic

Natural aesthetics, efficient workflows and reproducible results - not a problem with Zolid HT+ Preshades. The industrially preshaded blanks in 16 tooth shades are perfectly matched to the VITA classical shade key and deliver attractive restorations  without compromises. Zolid HT+ Preshade combines natural aesthetics with outstanding mechanical properties. With increased translucency an... > Read more
05.10.2017

Ceramill Argovent 2 - Greater capacity and considerably more efficient

The new Ceramill Argovent 2 gives the processing of Ceramill Sintron an entirely new meaning in terms of "Economy and handling". Thanks to this new development, the costs per unit can be reduced yet again. An improved sealing and thermal conductivity concept has led to an increase in capacity of 25% at unchanged gas consumption. This uses distortion-free ceramics with a special surface quality,... > Read more
26.09.2017

New Chairman of the Supervisory Board

Amann Girrbach announced the appointment of Mr. Peter Nicklin as Chairman of the Supervisory Board. Rainer Baule, the previous Chairman of the Supervisory Board, resigned from his position and remains a member of the Supervisory Board.  Peter Nicklin has extensive global experience across the healthcare industry which he brings with him to the Amann Girrbach Group. ... > Read more
25.08.2017

Ceramill Software Update available shortly

The Ceramill CAD/CAM Update (Release 3.6 I 2017) will be available shortly for all our Ceramill customers with the following topics: _ Carving for Ceramill Motion 2 (DNA) _ Speed milling/dry milling of splints for Micro 5X/Ceramill Motion 2 (all generations) _ Multiple holders for Ceramill Micro IC _ Integration of the new materials (Zolid HT+ White, Zolid FX Preshade and VITA ENAMIC multiColo... > Read more
20.07.2017

VITA ENAMIC® MULTICOLOR FOR CERAMILL: HIGHLY AESTHETIC HYBRID CERAMICS

VITA ENAMIC multiColor combines the known advantages of VITA ENAMIC with a highly efficient fabrication workflow. As of immediate, the VITA ENAMIC multiColor blocks with an integrated truly natural shade gradient are available to users in six finely graduated layers from the neck to the incisal edge.  Even without customising, the dual network structure of this material allows for highly aes... > Read more
20.04.2017

Speed up your lab - The new DNA+ scanner generation

The new DNA+ scanner generation sets new standards in precision, flexibility in use, convenience and speed. The main focus in developing the Ceramill Map400+ and Map200+ was on massively reducing scan and matching times. The new generation can therefore provide the advantage of up to 50% saving in time in the scan procedure, depending on the indication.  With new features such as colour... > Read more
20.04.2017

Ceramill Therm S - The quick, flexible sintering solution

The Ceramill Therm S gives the laboratory a new level of flexibility and represents the perfect extension of your Zirkonia furnace equipment. It allows the sintering of single restorations in only 2 hours. Furthermore, the compact, energy-efficient furnace impresses, above all, with its range of applications.  The Therm S provides not only the ability to sinter up to 6-unit restorations and ... > Read more
20.04.2017

Setting new standards - Ceramill Zolid FX Multilayer in 16 A-D shades

Ceramill Zolid FX Multilayer (SHT) zirconia blanks with seamless shade and translucency gradients are now available in 16 VITA shades and three heights (14 mm, 16 mm, 20 mm).  Ceramill Zolid FX Multilayer guarantees a high degree of aesthetics, efficiency and economy for your lab. Two VITA tooth shades can be simultaneously covered in a single blank thanks to the intelligent nesting concept.... > Read more
20.04.2017

Perfect Finishing. Ceramill Green State Finishing Kit by Knut Miller

The Ceramill Green-State Finishing Kit provides users with the optimum instruments for finishing Ceramill Zirconia or Ceramill Sintron restorations before the sintering process. This set separates restorations, trims pins and produces the finest detail definition with outstanding efficiency. The special instruments developed in collaboration with dental technician Knut Miller significantly contri... > Read more
25.01.2017

The first DNA Generation unit

We congratulate Julien Krämer (29, Master Dental Technician and owner of Krämer Dental Laboratory, in Lampertheim, Germany) and his whole team!  At the beginning of december Julien Krämer was thrilled to install the very first Ceramill DNA generation unit – a Ceramill Motion 2 – in his lab. The lab manager founded the laboratory in January 2015 after his training, ... > Read more
25.01.2017

Ceramill M-Gin for REAX Bridges - 5 Reasons for opting for REAX

The Ceramill M-Gin software module enables easy digital fabrication of fixed restorations with gingiva sections on implants - so-called REAX (Reliable All on X). The following are 5 reasons why you should opt for the M-Gin. 1. Plug and Play for everyone: Complex restorations on implant bridges can be quickly and easily fabricated using the Ceramill M-Gin module. The Wizard integrated in the softw... > Read more
25.01.2017

Ceramill Mikro IC - anticipation is tremendous!

Carving – a new processing mode goes around the world. In recent weeks, Ceramill Mikro IC has provided plenty to talk about in the dental world. Mikro IC sets new standards in the market with 9-15 minutes processing time per produced unit with only one processing spindle. The Mikro IC also impresses with its solid construction and resulting high quality of the restorations, the innovative, ... > Read more
25.01.2017

IDS 2017 - The Countdown is on

  In a few weeks the biggest dental fair, the International Dental Show (IDS) in Cologne, Germany, will open its doors for the 37th time. Our customers can also look forward to exciting, innovative new products this year.  We are already providing a very special service before the beginning of the fair for those hungry for news: from 23 January we are starting our “Route to the ... > Read more
14.10.2016

Ceramill DNA – Performance line.

Amann Girrbach has regularly set new trends for CAD/CAM-based fabrication of restorations with the Ceramill brand of CNC desktop units. The highly precise milling systems and key components of the Ceramill CAD/CAM system have become an impulse generator and global standard for digital in-house fabrication. Using this expertise to influence construction components, machine design, milling strategie... > Read more